Gutters and downspouts calculator
Coil, hangers, end caps, corners, outlets, downspouts and elbows for seamless gutters, with guards if wanted, from the eaves.
An estimate of the materials a job takes, worked out in your browser: check it against the job, and against your local code where it matters. Nothing you type leaves this page.
Put in the job's numbers and choices, and the list below follows them.
What it takes
Worked out for Eaves 150 ft, Gutter runs 4 each, Downspouts 6 each, Inside corners 2 each, Outside corners 4 each, Gutter: 5 in K-style, Stories: One, Gutter guards: No.
Gutter
- Aluminum gutter coil, 5 in 158 ft Eaves 150 ft: 150 ft; plus 5% waste: 157.5; rounded up to whole ft: 158.
- Hidden gutter hanger 75 each Eaves 150 ft, one per 2: 75 each. One every 24 in.
- Gutter end cap 8 each Gutter runs 4 each × 2: 8 each.
- Inside gutter corner 2 each Inside corners 2 each: 2 each.
- Outside gutter corner 4 each Outside corners 4 each: 4 each.
- Gutter sealant 4 tube Eaves 150 ft, one per 40: 3.75 tube; rounded up to whole tube: 4.
- Zip screws, 250 ct 1 bag A fixed 1: 1 bag.
Left out: Gutter guard, 5 ft (only when Gutter guards is Yes).
Downspouts
- Gutter outlet 6 each Downspouts 6 each: 6 each.
- Downspout, 2x3 in, 10 ft 6 each Downspouts 6 each × 1 (One): 6 each.
- Downspout elbow 18 each Downspouts 6 each × 3: 18 each.
Labor
- Seamless gutters 150 ft Eaves 150 ft: 150 ft.
What it leaves out
- Removing the old gutters
- Fascia repair
- Underground drains
The same calculator in SMG Tools
In SMG Tools this calculator fills its numbers from the client's site measurements, prices every line from your own Price Book, checks the margin against your target, and carries the lines onto the proposal, the job's plan and the purchase order. It is one of the ready-made calculators SMG Tools sets up for gutters, siding and insulation, and calculators are on every plan.