Interior trim and doors calculator
Baseboard, prehung doors, casing and hardware for a room or a whole floor.
An estimate of the materials a job takes, worked out in your browser: check it against the job, and against your local code where it matters. Nothing you type leaves this page.
Put in the job's numbers and choices, and the list below follows them.
What it takes
Worked out for Baseboard length 200 ft, Interior doors 4 each, Windows to case 3 each.
Trim
- Primed baseboard, 3-1/4 in x 16 ft 14 each Baseboard length 200 ft at 16 a piece: 12.5 each; plus 10% waste: 13.75; rounded up to whole each: 14.
- Window casing set 3 set Windows to case 3 each: 3 set.
- Paintable caulk 7 tube Baseboard length 200 ft, one per 32: 6.25 tube; rounded up to whole tube: 7.
- Finish nails, 16 ga and 18 ga brad 1 lot A fixed 1: 1 lot.
Doors
- Prehung interior door, 32 in 4 each Interior doors 4 each: 4 each.
- Door casing set 4 set Interior doors 4 each: 4 set.
- Door knob or privacy set 4 each Interior doors 4 each: 4 each.
Labor
- Base trim 200 ft Baseboard length 200 ft: 200 ft.
What it leaves out
- Paint
- Door slab or frame repair
The same calculator in SMG Tools
In SMG Tools this calculator fills its numbers from the client's site measurements, prices every line from your own Price Book, checks the margin against your target, and carries the lines onto the proposal, the job's plan and the purchase order. It is one of the ready-made calculators SMG Tools sets up for remodeling, and calculators are on every plan.