Tile floor calculator
Tile, thinset, grout, backer board and leveling clips for a tiled floor, by the tile size and what it goes down on.
An estimate of the materials a job takes, worked out in your browser: check it against the job, and against your local code where it matters. Nothing you type leaves this page.
Put in the job's numbers and choices, and the list below follows them.
What it takes
Worked out for Floor area 200 sq ft, Tile size: 12x24 and larger, Subfloor: Concrete.
Tile
- Floor tile 220 sq ft Floor area 200 sq ft × (1 + (10 (12x24 and larger) ÷ 100)): 220 sq ft.
- Thinset mortar, 50 lb 5 bag Floor area 200 sq ft ÷ 40 (12x24 and larger): 5 bag.
- Grout 2 bag Floor area 200 sq ft, one per 100: 2 bag.
- Grout sealer, quart 1 each Floor area 200 sq ft, one per 200: 1 each.
- Tile leveling clips, 250 ct 2 bag Floor area 200 sq ft, one per 100: 2 bag. Large tile lies flat with leveling clips.
Backer board
Left out: Cement backer board, 3x5 (only when Subfloor is Wood, under backer board); Backer board screws, 1 lb (only when Subfloor is Wood, under backer board).
Labor
- Tile installation 200 sq ft Floor area 200 sq ft: 200 sq ft.
What it leaves out
- Removing the old floor
- Subfloor repair
- Heated floor mats
The same calculator in SMG Tools
In SMG Tools this calculator fills its numbers from the client's site measurements, prices every line from your own Price Book, checks the margin against your target, and carries the lines onto the proposal, the job's plan and the purchase order. It is one of the ready-made calculators SMG Tools sets up for flooring, and calculators are on every plan.